You’ve got a lovely ring and it doesn’t fit. What’re you doing?
The obvious response is, “You’re resizing it.” But did you know that there are more alternatives?
The first move is to get your finger tested for size professionally and decide what size your ring is actually. To measure the current ring size and ring sizers for your finger, a jeweler will use a ring mandrel.
Resizing: If your ring is too thin, it can be slightly extended by a jeweler through a process called annealing. Annealing is when the metal is heated up and extended and then cooled to the desired size. Alternatively, to the back of the ring, a jeweler may add a piece of metal, an addition to achieve the larger size needed. Ring resizing leaves no detectable lines or traces if done correctly. If your ring is too big, then to achieve the correct size, a jeweler can cut and remove the metal required.
Speed Bumps: If your ring is too thin, it can be slightly extended by a jeweler through a process called annealing. Annealing is when the metal is heated up and extended and then cooled to the desired size. Alternatively, to the back of the ring, a jeweler may add a piece of metal, an addition to achieve the larger size needed. Ring resizing leaves no detectable lines or traces if done correctly. If your ring is too big, then to achieve the correct size, a jeweler can cut and remove the metal required.
Tension Spring: A tension ring (or a butterfly) is a springy, U-shaped piece of metal that the jeweler attaches to the ring’s foundation. This is a perfect remedy for fingers that, because of swollen knuckles and finger sizes, have major size variations. Based on the scale, the nature of the U shape flexes in or out.
Adjustable Shanks: The hinged, expandable, ring shank of the Finger Mate opens wide to go easily over an expanded knuckle, then tightly closes and locks for a safe and comfortable fit. Simply grab the top of the ring to open and pull it up.
Ring Guard: A ring guard, or temporary sizer, is a ring size adjuster that is a metal strip that is clamped to make a closer fit within your ring. There are plastic tube sizers that serve the same purpose, too. These are really intended as a placeholder before it is possible to apply a more permanent solution for a ring resize.
Remake in Correct Size: Your jeweler should re-order your ring in the correct size and swap it for you if your ring is new and resizing is not the best course of action. If your ring is older, a quote should be given by your jeweler to restore your ring to the correct size.
All these sizing solutions will be discussed with you by a good jeweler. They’re going to go over the pros and cons and help you make the right option for yourself and the safety of your ring.
READ: Magento Ecommerce
WHEN TO NOT RESIZE A RING
If you find your ring spinning unexpectedly on your finger, pinpointing the root cause should be your first move. For several reasons, fingers may shorten, many of them temporary, like cold weather or weight loss. Remember, too, the conditions under which your ring was first mounted. At the time of fitting, anything obvious, like pregnancy, will cause your ring to fit more snugly. But something more unlikely and seemingly insignificant, such as a high-salt meal right before your size, may also be the culprit. Perhaps you are only very sensitive to variations in temperature. A temporary ring adjuster is ideal if the ring size tends to go up and down with the mercury.
Read on to learn how to make a ring smaller without ring resizing, whether you need an interim solution before you hit your target weight, or you need something that you can take in and out indefinitely according to the weather. Take it off, store it tightly in a cloth pouch and take it to your jeweler if your ring doesn’t fit just correctly. Their professional opinion will be able to tell you whether you should resize your ring permanently, have them add an adjustable ring sizer like the ones discussed previously, or go with a plastic guard that you can use as required.